Ford 1999 Crown Victoria Bedienungsanleitung PDF herunterladen (Seite 152)

• If the oil level is below the MIN

mark, add enough oil to raise the

level within the MIN-MAX range.

• Oil levels above the MAX mark may cause engine damage. Some oil

must be removed from the engine by a service technician.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the MIN and MAX ranges, add only

certified engine oil of the recommended viscosity. Remove the engine oil

filler cap and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark on the dipstick.

Engine oil and filter recommendations

Look for this certification mark.

Ford oil specification is WSS-M2C153-G.

Use SAE 5W-30 motor oil certified for gasoline engines by the American

Petroleum Institute.

Maintenance and care

152

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 207 208

Keine Kommentare

Ford 1999 Crown Victoria Bedienungsanleitung Seite 152