Ford 2013 Edge v.2 Bedienungsanleitung PDF herunterladen (Seite 294)

100

101

For Vehicles with Halogen Headlamps:

On the wall or screen you will

observe a flat zone of high intensity

light located at the top of the right

hand portion of the beam pattern. If

the top edge of the high intensity

light zone is not at the horizontal

reference line, the headlamp will

need to be adjusted.

For Vehicles with HID Headlamps:

There is a distinct cut-off (change

from light to dark) in the left

portion of the beam pattern. The

top edge of this cut-off should be

positioned 2 inches (5 centimeters)

below the horizontal reference line.

4. Locate the vertical adjuster on

each headlamp. Using a Hex head

driver, turn the adjuster either

clockwise or counterclockwise in

order to adjust the vertical aim of

the headlamp. The horizontal edge

of the brighter light should touch

the horizontal reference line.

5. Close the hood and turn off the lamps.

HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS

NON-ADJUSTABLE.

CHANGING A BULB

Lamp Assembly Condensation

Exterior lamps are vented to accommodate normal changes in pressure.

Condensation can be a natural by-product of this design. When moist air

enters the lamp assembly through the vents, there is a possibility that

condensation can occur when the temperature is cold. When normal

condensation occurs, a thin film of mist can form on the interior of the

lens. The thin mist eventually clears and exits through the vents during

normal operation. Clearing time may take as long as 48 hours under dry

weather conditions.

294 Maintenance

2013 Edge (edg)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 512 513

Kommentare zu diesen Handbüchern

Keine Kommentare

Ford 2013 Edge v.2 Bedienungsanleitung Seite 294

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Ford 2013 Edge v.2